Dimethylbenzylamine CAS103-83-3 N-dimthylbenzylamine BDMA
PU Catalyst: BDMA (benzyldimethylamine) CAS:103-83-3
Over view:
Common Name: Benzyl Dimethyl Amine
Other Chemical Names: N,N-Dimethylbenzylamine, Benzenemethamine, N,N-dimethyl-;Benzenemethanamine,N,N-dimethyl-;Benzylamine,
Physical and chemical properties:
Appearance | Form: transprant light yellow liquid |
Odour | no data available |
PH | 10 at 10 g/l at 20 °C |
Melting point/freezing point | Melting point/range: -75 °C – lit. |
Initial boiling point and boiling range | 181 – 184 °C at 1.020 hPa – lit. |
Flash point | 53 °C – closed cup |
Evaporation rate | no data available |
Flammability (solid, gas) | Upper explosion limit: 6,3 %(V) |
Upper/lower flammability
or explosive limits |
Lower explosion limit: 0,9 %(V) |
Relative density | 0,9 g/cm3 at 25 °C |
Water solubility | soluble |
Partition coefficient: noctanol/water | log Pow: 1,87 |
Molar formular | C9H13N |
Molar mass | 135.21 |
Section 1: Chemical Product and Company Identification | |
Product Name: BDMA
Catalog Codes: Not available.
CAS#: 103-83-3
RTECS: Not available.
TSCA: Not available.
Chemical Formula: C9H13N |
Contact Information: Shanghai Qiguang Industry and Trade co., LTD Floor 5, qigang building, 581 yanchang middle road, District, Shanghai, China. Sales: +86-21-56777378 International Sales: +86-21-56777378 Order Online: www.51qiguang.com
CHEMTREC (24HR Emergency Telephone), call: +86-21-56777378
International CHEMTREC, call: +86-21-56777378
|
Features and uses:
A liquid tertiary amine catalyst. Can improve foam cure and demolding time. It is an excellent candidate to consider for use in water-NCO reaction in rigid polyurethane foams.
BDMA is typically suitable to replace DMCHA in formulations using a high level of water as blowing or co-blowing agent can reduce surface friability and improve adhesion of foam to substrates.
BDMA promotes the urethane reaction and is commonly used in high-water rigid foam applications to reduce friability. It has a characteristic but low amine odor, and is soluble in water and in most organic solvents.
BDMA is used in flexible slabstock and rigid foam applications.
It promotes the urethane reaction and is commonly used in high-water rigid foam applications to reduce friability.
BDMA is also used for flexible slabstock foam applications.
Storage Information
Recommends that our catalysts be stored in a dry and cool area under appropriate ventilation conditions. Each container should be closed tightly to avoid contamination with moisture or other negative influences that could change the products’ performance in the end use.
Package:
180KG/Steel Drum
Typical Properties
Water, wt-% 1.0
Colour, Pt-Co Light yellow
Flash Point, ℃ 54
Density, g/ml; 20/20,℃ 0.90
Freezing Point, ℃ -75
Boiling Point, 760mmHg, ℃ 183-184
Storage Information
Recommends that our catalysts be stored in a dry and cool area under appropriate ventilation conditions. Each container should be closed tightly to avoid contamination with moisture or other negative influences that could change the products’ performance in the end use. The optimum storage temperature is between 10 °C and 30 °C. Lower and higher storage temperatures are not preferable and should be avoided.
BDMA
Description
BDMA promotes the urethane reaction and is commonly used in high-water rigid foam applications to reduce friability. It has a characteristic but low amine odor, and is
soluble in water and in most organic solvents. .
Applications
BDMA is used in flexible slabstock and rigid foam applications.
Shelf Life
12 months/date of manufacture.