Jiangxi New Materials Co., Ltd.

Features and effects:
1. Concrete waterproofing agent is specially formulated for adding waterproof concrete layer, which can exert complete waterproof and moisture-proof effect.
2. Mixed in concrete, it has good diffusibility, strong cohesion, and high concrete waterproofing effect.
3. Because it can produce unique adhesion, material separation and floating phenomena will almost never occur. (Jiangxi New Materials Co., Ltd.)
4. Strong acid and alkali resistance, effectively preventing concrete surface weathering.
5. For waterproofing, just use a waterproofing agent diluted with water as mixed water. It will chemically combine with the lime hydroxide in the cement to make the cement particles water-repellent and clogged
Capillaries, reduce water absorption and reduce water penetration pressure.
Usage:
1. Recommended projects for various foundation projects or basement wall and floor concrete projects that require a high degree of pressure resistance or waterproofing.
2. General concrete, cement products, waterproof and moisture-proof additives.
3. Waterproof and moisture-proof cement painting projects for basements, roofs, platform storage tanks, water towers, wind head walls, underground passages, etc.
Method for adding waterproof concrete layer:
ACP 110 waterproof concrete addition amount: cement dosage 2%
Add method:
1. On-site mixing: m. Set the water volume first and deduct the concrete waterproofing agent that should be added
2. Add twice the weight of water and then add the amount of concrete waterproofing agent
Example:
1. Water minus concrete waterproofing agent = design slump
[220kg-(2 × 7kg)] + 7kg= design slump
2. Ready-mixing plant: The above addition method can be completed in one go
3. On-site addition to the ready-mix truck: In the ready-mixing site, the amount of water twice the weight of the concrete waterproofing agent should be deducted first, and then the amount of concrete waterproofing agent should be added to the site, and mixed quickly for 3 to 5 minutes (in order to ensure uniform mixing on site, ready-mix The vehicle must not be overloaded according to the specified capacity).
Construction method of stucco layer:
1. Depending on the individual circumstances of underground concrete leaks, first use a quick-setting agent mixed with cement to seal the water and repair it. If the amount of water inflow is large, please use regular water blocking methods to completely stop the water leakage.
2. Remove debris, oil, dirt and garbage from the concrete surface, and then rinse thoroughly with water. If there are pipes, etc., apply resin caulking material around them first, then press the caulking material in with quick-knot cement, and finally prevent it
Gouache.